,

Foot Valves Type RV105

Brass foot valve with coarse filter

Sizes

1/2″ – 4″

Thread

ISO 228

Case material

Brass

Dichtung

NBR

  • In stock
  • European quality
  • Unbeatable prices

Brass Foot Valve – Backflow prevention and suction protection in one component

The RV105 type foot valve combines a spring-loaded check valve with a pre-installed
brass coarse filter. It is mounted at the beginning of the suction line and fulfills two tasks
simultaneously: the water column remains in the line after the pump is switched off, and
coarse impurities are kept away from the system.

The body, disc, and strainer are made of brass, while the seat is made of NBR. The connection is made
via internal threads according to
ISO 228/1
in the following sizes:

  • 1/2″, 3/4″, 1″, 1 1/4″, 1 1/2″, 2″, 2 1/2″, 3″ and 4″
  • Max. operating pressure: 10 bar (8 bar from 1 1/4″)
  • Operating temperature: max. +90°C

The compact design with an integrated suction basket makes the brass foot valve a
practical solution for suction applications – without the need for an additional filter in the line.

Areas of Application and Installation Instructions

The RV105 suction valve is suitable for numerous suction applications:

  • Wells and cisterns
  • Domestic waterworks and pressure boosting systems
  • Garden and field irrigation
  • Industrial pumping stations and suction lines
  • Tank and rainwater harvesting systems

Vertical installation is recommended for reliable operation. The valve closes via
spring force and gravity, preventing the water column from dropping. There should be sufficient distance between the foot valve
and the bottom of the container to ensure that no air or
bottom sediment is sucked in.

Buy foot valves online at Fergo

All sizes of the RV105 foot valve are
available from stock
at Fergo. For applications with other mesh sizes, materials, or special designs, the
Fergo team is available to provide advice –
contact us
for an individual solution.

Alternative Check Valves

If no integrated filter is required, the
RV101 threaded check valve
made of stainless steel with a Viton seal offers a higher-performance alternative for higher temperatures
(up to +150°C) and chemically aggressive media. For flange connections and larger sizes,

disco check valves
and other
check valves
are available in the Fergo online shop.

Foot valve RV105-MMNFI

  • 1/2″, 3/4″, 1″, 1 1/4″, 1 1/2″, 2″, 2 1/2″, 3″, 4″
  • Body: Brass
  • Disc: Brass
  • Seat: NBR
  • Connection: ISO 228/1
  • Operating temperature: max. 90°C
  • Max. operating pressure: 10 bar (8 bar from 1 1/4″)
  • Strainer: Brass

Technical Specifications

Technical Specifications
Type Check Valve
Sizes 1/2" – 4"
Thread ISO 228
Case material Brass
Disc Brass
Pressure range PN10, PN8
Dichtung NBR
Screen/Filter Brass

Documents & 3D

FERGO Special Solutions

When standard
isn’t enough.

Special materials such as duplex, Hastelloy and titanium — special nominal diameters up to DN 1000 — special actuators for ATEX Zone 1. We develop your bespoke ball valve solution.

Special Materials

Duplex 1.4462, Hastelloy C-276, Titan Gr.2, Inconel 625

Special diameters

DN8 to DN1000+ — all flange standards: DIN, ANSI, JIS

ATEX Drives

Zones 1 & 2 — electric (24V to 240V), pneumatic

Complete documentation

Material Certificate 3.1 / 3.2, Pressure Test, SIL Certification