Flanged Ends KH156

FERGO Armaturen GmbH has a wide variety of different ball valves. These ball valves mainly differ in connection form, body material, maximum pressure approval and the available certificates (TA Luft, FireSafe, DVGW Gas, DVGW Trinkwasser). You can choose between flange-connection (DIN or ANSI), threaded ends (DIN or ANSI and female or male thread) and socket weld or butt weld ends. The available standard body materials are brass, steel and stainless steel. Special materials like e.g. titan and duplex are also available on request. Ball valves with ISO-top mounting flange (ISO 5211) can be automated with pneumatic or electric actuators. The different sizes, pressure stages and materials are shown on the datasheet, which can be downloaded on our website. For special executions please contact our sales department.

Ball valve KH156-SSTHF (Art.-Nr.: 100-1610-xx)
• DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150
• WAFER type ball valve
• Full bore
• Body: 1.4408 (A351 CF8M)
• Ball: 1.4408
• Ball sealing: TFM1600 (PTFE)
• Temp. (min./max.): -29°C bis +175°C
• Mounting flange acc. to ISO 5211, F03-F04
• TA Luft
• ATEX Ex II 2 GD c T3
• SIL IEC 61508-1/2/4-7:2010 & IEC 61511-1:2016
• Operation: Handlever

Type

Ball Valve

Operations

Electric Actuator, Pneumatic double-acting, Pneumatic single-acting, Lever, Topflange (ISO 5211)

Sizes

DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150

Flange connection

PN10, PN16, PN40, PN25

Body material

1.0619, ASTM A351, A216 WCB, 1.4404

Ball material

1.4408, 1.4308

Ball seat

PTFE, TFM1600, RTFE

Connection

Flanges