Flanged Ends RB106

The ball check valve RB106 reliably avoids a backflow of the medium and, due to its ball which unclamps the whole pass, for polluted mediums, too. For this reason, ball check valves are often applied in waste water industries. We run these valves with different materials and coatings (EPDM, NBR, PTFE, Viton…). There is a large selection of ball check valves with different designs, materials and application areas. Feel free to contact our sales department to receive a suitable offer.

Ball check valve RB106-SLNOF (Art.-Nr.: 303-1008-xx)
• DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300
• Face to face F6
• Installation between flange acc. DIN PN16
• Body and cover: AISI316
• Ball: steel encapsulated with NBR rubber
• Temp. (min./max.): -20°C to +80°C
• max. pressure: 16 bar

Ball check valve RB106-SLNOI (Art.-Nr.: 303-1018-xx)
• 1 1/4″, 1 1/2″, 2″
• Threaded ends BSP
• End to end length =140mm
• Body and cover: AISI316
• Ball: steel encapsulated with NBR rubber
• Temp. (min./max.): -20°C to +80°C
• max. pressure: 16 bar

Type

Ball Check Valve

Sizes

DN32, DN40, DN50, DN65, DN80, DN100, (Larger on request)

Flange connection

PN10, PN16

Body material

1.4401

Pressure range

PN16

Ball material

Alu+NBR

Sealing

NBR

Connection

F/F, Flanges