Gas ball valve type KH124G

Stainless steel ball valve with DVGW-Gas approval

Gas ball valve – stainless steel: DVGW approval

The gas ball valve type KH124G is a 2-way shut-off ball valve with full bore. As the body and ball are made of stainless steel 1.4408, it offers optimum corrosion resistance and a long service life. The ball seal is made of PTFE. This stainless steel ball valve has a female thread connection in accordance with DIN EN 10226-1 (ISO 7/1). Depending on the operating pressure, the ball valve can be used for temperatures from -20 °C to +60 °C.

The ball valve type KH124G is suitable for use in hazardous areas, group 2, category 1 according to Atex 2014-34-EU. Additionally, it has the DVGW approval according to the Gas Appliances Directive GAR EU-2016-426, classification according to PED category 3 PED 2014-68-EU, TA-Luft approval according to DIN EN ISO 15848 & LABS conformity according to VDMA 24364. Suitable for a multitude of applications, this ball valve is suitable for use with gases according to G260, argon, hydrogen, biogas according to G262, acetylene and many more. It also has a fire-safe design and is silicone-free.

Automated Gas ball valve: pneumatic and electric

As the ball valve is equipped with a mounting flange in accordance with DIN ISO 5211, installation of the actuator is much easier. With our expertise in valve automation, we can offer you these ball valves fully automated with electric and pneumatic actuators, without additional assembly costs. We can also supply them with additional control accessories such as a pneumatic solenoid valve, limit switch box, positioner, mounting kits and stem extension.

Ball valve KH124G, (Product number: 100-1075-xx): 1/2″, 3/4″, 1″, 1 1/4″, 1 1/2″, 2″

  • Design: 2-way • Full bore • 2-piece body
  • Threaded ends acc. to DIN EN 10226-1 (ISO 7/1), Rp
  • Body / Ball: 1.4408
  • Stem: 1.4401
  • Ball seat: PTFE
  • Shaft seal: PTFE spring-loaded
  • Temperature range: -20°C…+60°C (depending on working pressure)
  • Max. working pressure: 16 bar
  • Direct mounting acc. to DIN ISO 5211
  • DVGW gas approval PN16 acc. to DIN EN 13774
  • DVGW-approval acc. to gas appliance regulation GAR EU-2016-426
  • Ex-area acc. group 2, category1, ATEX 2014-34-EU
  • TA Luft approval acc. to DIN EN ISO 1584
  • Actuation: Hand lever, electric actuator, pneumatic actuator, gearbox
  • Accessories & options: Pneumatic solenoid valve, limit switch box, positioner, stem extension

Product type

Ball valve

Size

1/2", 3/4", 1", 1 1/4", 1 1/2", 2"

Body/Ball

1.4408

Seat

PTFE

Nominal pressure

PN16

Connection

Innengewinde Rp nach DIN EN 10226-1 (ISO 7/1)

Actuation

Electric actuator, pneumatic double-acting, pneumatic single-acting, hand-lever, gearbox

Certification

TA-Luft approval, Fire-safe design, Silicon-free, LABS conform according to VDMA 24364
DVGW Gas approval PN16 according to DIN EN13774
DVGW Gas approval according to Gas appliances regulation GAR EU-2016-426
Atex: Suitable for Ex-zone, Group 2 Category 1 Atex 2014-34-EU

Visit our store

Over 25,000 products in stock

Visit Fergo Shop

DGRL_Logo
DVGM Logo
DVGW Product Logo
EX Logo
TA LUFT Logo
TÜV Süd Logo
WRAS Approved Product Logo
CE Logo